Manufactured by:
NUMO International

ABN: 37 814 763 439

Address:
PO Box 992,
Claremont,
WA 6910,
Australia

Phone:
0438 899 342

Email:
info at numoarm dot com

Base Plate

NUMO Toilet Seat Arms are manufactured from high tensile 8 mm thick steel which is zinc etched and plastic coated in appliance white.

Arms

NUMO Arms are manufactured from high impact Nylon reinforced polymer in white to match most toilet accessories.

Fixings

Two stainless steel bolts secure the Arms into position. The Arms have three height positions, the maximum being 35 mm.

Available as:

• Standard – Base plate 530 mm arms
  
  
• Bariatric – Base Plate 560 mm arms
  

 

 

 

Structural

NUMO Toilet Arm systems have been structurally tested by a certified testing authority for static durability loadings to a maximum of 150 KG [standard and bariatric models] and comply with Type A Domestic and Institutional use AS 3973: 2005 - AS 4688.2 and [ISO 7173].

Corrosion Resistance

NUMO Toilet Arm base plates were subjected to a 1000 hour salt spray test by a Certified Testing Authority and comply to Type A AS 2331.3.1 for application in bathrooms, showers and toilets.

Sizes

Standard width 530 mm [internal arm dimension] Bariatric width 560 mm [internal arm dimension].

MAXIMUM RECOMMENDED LOADING 150 KG.

Fixing

NUMO Toilet Arms are secured to the pan with Nylon or metal fixing bolts normally supplied with the toilet seat.

Base Plate Fixing Holes

NUMO Base Plates feature two slotted holes to the rear based on the Australian Standard of 155mm for toilet seat fixings. Please check measurement before ordering as some US pans differ from this dimension.